Accessories
OIL SKIMMING
Oil or most hydrocarbons have the nature to float on the surface of water. It is due to the difference of specific gravity. If the effluent is controlled, oil forms a uniform floating layer on the surface of the effluent. Now, there are so many methods to separate the top layer of hydrocarbon, such as Skimming, Decanting etc.
Oil Skimming is the most economical, Low maintenance method for removing floating oil, grease, fuel and other hydrocarbons from the fluid surface. The belt, Operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface . After passing over the top pulley the belt passes through scrapers where
oil is scraped of both the sides of the belt and discharged.

ADVANTAGES OF OIL SKIMMING

 Helps to meet pollution control norms .
 Reduces cost of disposal .
 Increases coolant life .
 Skimmed oil can be recycled and reused as a fuel or lubricant .
 Most cost effective way to remove oil.
 Consereve the parts wash water .

MBBR MEDIA
MODEL PP22
EFFECTIVE SPECIFIC SURFACE AREA OF MEDIA 400 M2 /M3
COLOUR BLACK
MEDIA HEIGHT 15 MM
MEDIA DIAMETER 22 MM
TYPE OF MEDIA MBBR MEDIA
MOC OF MEDIA VIRGIN PP UV STABILIZED
STRUCTURE CYLINDRICAL WITH EXTERNAL FINS
PSA/TSA RATIO (%) 75
SPECIFIC WEGIHT (kg/m2) SURFACE AREA 0.37
SPECIFIC GRAVITY 0.90 – 0.95 gms/cm3
MAX CONTINUOUS OPERATING TEMPERATURE 800C
VOIDAGE 98%
DENSITY (GM/CC) 0.93
MEDIA FILL RATE RANGE,%FILL OF V 25-55

STRUCTURE :-
• Made of high Grade polypropylene material .
• Rigid and strong structurally
• Uniform self-distribution

APPLICATION :-
• Multi Sewer System
• Upgrade of older Plants
• Food Industry
• Poultry

Where can we use Tube Set Tube settler

Residential and industrial waste water treatment Plants, Potable water treatment Plants, oil separators,In rectangular or circular section reinforced concrete pools or sheet construction tanks, Tube settler Lamella can be used, Shortly in all treatment plants where a good settling efficiency is expected .For some waste waters,a setting system using TUBE SET can become a stand –along solution .Water parameters cab be reduced to required criteria without needing to a chemical dosing, fast or slow mixing.
Tube set tler Systems for Clarification

Tube settlers and parallel plates increase the setting capacity of circular clarifiers and /or rectangular sedimentation basins by reducing the vertical distance a floc particle must be settle before agglomeration to from an larger particles. Tube settlers 600 and adjacent to each other, Which combine to form an increased effective setting times. Tube settlers capture the setteable fine flock that escapes the clarification zone beneath the tube ettlers and allows the larger floc to travel to the tank bottom in a more setteable form .The tube settler’s channel collects solids into a compact mass which promotes the solides to side to slide down the tube channel .
BLOWAIRE
Special Features of BLOWAIRE Roots Blower :-

• Positive displacement machines with constant volume characteristics 100% Oil free compression .
• Suitable for various gases such as air, nitrogen, carbon dioxide, inert gases etc.
• High precision helical timing gears for reliability & long life .
• Adjustable machine feet permit both horizontal & vertical floe of medium.
• V-belt drive for all operating pressure ranges .
• Dynamically balanced rotating components to ensure vibration free operations.
• Machine shaft height matched with standard ICE motor frame size .
• Solid, noise absorbing construction in cast iron .
• Heat resistant.
• Split casting design facilitates easy maintenance and repair .
• High efficiency with lower power consumption.
• Lower maintenance cost .
• Rugged construction for heavy-duty application .
• Promote after sales services all over the country .
COARSE BUBBLEDIFFUSER
Structure:-
• Perforated Membrane with Low Plsticizer EPDM / SILICON rubber compound .
• Membrane Support Base with slits uPVC / PP of high pressure .
• Membrane rim sealed with micro slits to prevent clogging and back flow with flexibility of air volume .
• Membrane rim sealed with the base with stainless steel screw for prevention of side leakage .

Application :-
• Municipal wastewater treatment.
• Intermittent operation capability.
• Raw water treatment.
• Sludge stabilization.
• Aeration offish ponds.
• Aeration of streams and lakes.

Advantage :-
• High oxygen transfer efficiency.
• High resistance to clogging.
• Small diameter of air bubble
• Wide air flow range.
• Low pressure loss.
• Low energy cost.
• Easy installation.
• Water-stirring effect.
• Back flow prevention.
• Self cleaning operation.
• Intermittent operation capability.
Enquiry

Name * :
Contact *:
Subject *:
Message: